Controlling the Negative Pressure Caused by Water Hammer in Water Conveyance Pipe Lines Using Hydropneumatics Tank and Air Valves (A Case Study of Mehran City, Ilam Province)

Document Type : Original Article

Authors

1 Water Engineering Department,Agriculture Faculty,Ilam University,Ilam,Iran

2 water structure department, agriculture faculty, ilam university,Ilam,IRAN

3 civil faculty, ilam Islamic azad university

Abstract

Whenever and for any reason the velocity of the fluid ceases in the transfer line or water distribution networks, pressure waves will form in the pipe lines, which can produce a pressure several times more than a pressure pump’s output and lead to a great deal of tension on network’s components, which in turn will cause the water hammer phenomenon. Today, in every water transfer project, a detailed study on the water hammer phenomenon is essential, so that with a full recognition of this process’s adverse effects, the adequate measures would be taken to deal with it.This study uses Water Hammer V8i software to analyze the water hammer of Mehran city’s border terminal water conveyance pipe. The study was executed in 3 phases of simulation with protective equipment, without the protective equipment and with consultant’s recommended equipment. The results indicate that in the phase without the protective equipment, a great deal of negative pressure builds up along the water conveyance pipe line that needs to be controlled. In the next step, various combinations of Hydropneumatic tank and air valves were suggested. The results of several simulations showed that a 2 square meter Hydropneumatic tank and 3 fifty millimeter air valves will be capable of controlling the negative pressure along the pipe line.

Keywords


 
احتشام منش، ج.، (1389)، راهنمای نرمافزارHammer، انتشارات آیدین، تهران.
حاضری، ا.، قبادیان، ر.، و فاطمی، س.ح.، (1395)، "بررسی ضربه قوچ در شبکه‌ آبیاری اسماعیل‏آباد با استفاده از نرم‌افزار Hammer"، اولین کنفرانس ملی پژوهش‌های نوین در علوم فنی و مهندسی، اردبیل.
خواجه‌های زاد، ف.، و احدیان، ج.، (1395)، "کارایی شبکه‌های آبرسانی تحت پدیده ضربه قوچ بر مبنای ضریب پایداری (مطالعه موردی: شبکه آبرسانی شهرستان فریدون‏شهر)"، نشریه دانش آب و خاک، 26(1/2)، 59-71.
سیاحی، ع.، جلیل‌زاده، ر.، و سیاحی، ا.، (1394)، "بررسی پدیده ضربه قوچ در ایستگاه‌های پمپاژ و خطوط انتقال آبرسانی"، اولین همایش مدیریت تقاضا و بهره‌وری مصرف آب، شرکت آب و فاضلاب استان همدان، همدان.
سیاری، س.، و خانجانی، م.ج.، (1392)، "آنالیز چکش آبی در سیستم آبگیر سد آدرنجان"، دوازدهمین همایش ملی آبیاری و کاهش تبخیر، دانشگاه شهید باهنر کرمان، کرمان.
قبادیان، ر.، و بهرامی، ز.، (1392)، "بررسی عددی تأثیر طول و قطر انشعاب بر هیدرولیک جریان‌های میرا در لوله‌های تحت فشار"، کنفرانس مهندسی عمران و توسعه پایدار با محوریت کاهش خطرپذیری در بلایای طبیعی، مؤسسه آموزش عالی خاوران، مشهد.
کریمی، م.، (1391)، آموزش کاربردی مفاهیم ضربه قوچ در Water Hammer، انتشارات نوآور، تهران.
محمدی، ر.، داودی، م.ح.، و رامیان، آ.، (1395)، "شبیه‌سازی عددی ضربه قوچ در جریان آرام درون یک لوله"، اولین کنفرانس بین المللی مهندسی مکانیک و هوا فضا، تهران.
معصومی پهرآبادی، ع.، طحنی، آ.، و دانشفراز، ر.، (1393)، "بررسی ضربه قوچ در خط انتقال و ایستگاه پمپاژ آب (مطالعه موردی: دشت بناب)"، سیزدمین کنفرانس هیدرولیک ایران، دانشگاه تبریز.
Chaudhry, H. (2014), Applied hydraulic transients, Springer,New York, Heidelberg, Dordrecht, London.
Holloway, M., and Chaudhry, H., (1985), “Stability and accuracy of water hammer analysis”, Advances in Water Resources, 8(3), 128-121.
Skulovich, O., Perelman, L., and Ostfeld, A., (2014), “Modeling and optimizing hydraulic transients in water distribution systems”, Procedia Engineering, 70, 1565-1558.