@article { author = {kaboosi, kami and kaboosi, farzad and fadavi, mehran}, title = {The Effect of Greywater and Zeolite Usage in the Construction and Curing of Plain Concrete in Different Cement Contents and Ages}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {4}, number = {4}, pages = {69-80}, year = {2019}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2019.189220.1161}, abstract = {Regarding the significant contribution of the concrete industry in water consumption and greenhouse gas emissions, it is necessary to study the possibility of using unconventional waters and environmental friendly materials in this industry. Accordingly, the present study was conducted to investigate 120 treatments including three levels of water quality (tap water, greywater and mixture of equal ratio of tap water and greywater), four levels of zeolite (0, 10, 20 and 30 percent of zeolite application instead of cement in the concrete mix), two levels of cement content (250 and 350 kg.m-3) and five curing ages (3, 7, 21, 56 and 90 days) in three replications by construction of 360 concrete specimens. Considering the considerable types of the experimental treatments in this study and in respect to the lack of statistical analysis in previous studies, the results of this study were analyzed based on a completely randomized design with factorial experiment using analysis of variance (ANOVA) and means comparison (LSD) tests. The results showed that the use of greywater, in whole or combined, increased the compressive strength of concrete. Also, although the application of zeolite in both cement contents generally reduced the compressive strength of concrete, the rate of change was significantly lesser in cement content 350 kg.m-3 than 250 kg.m-3, so that replacement of 10%, 20% and 30% of cement by zeolite led to decrease of the compressive strength by 15.0%, 26.1% and 34.0%, respectively; whereas in the cement content 350 kg.m-3, the changes of compressive strength of specimens were -2.4%, +5.4% and -13.7%, respectively. However, considering the significant interaction of these two factors with water type, which means the different effects of water quality and the percentage of zeolite on different contents of cement, the best level of application of zeolite and water type regarding the cement content should be selected based on in-situ mix design test.}, keywords = {Analysis of variance,Curing age,Interaction,mix design,Unconventional Water}, title_fa = {تاثیر استفاده از آب خاکستری به‎همراه زئولیت در ساخت و عمل‌آوری بتن غیرمسلح در عیارهای سیمان و سنین مختلف}, abstract_fa = {نظر به سهم قابل‎توجه صنعت بتن در مصرف آب و انتشار گازهای گلخانه­ای، بررسی امکان استفاده از آب­های نامتعارف و مصالح دوستدار محیط‎زیست در این صنعت ضروری است. بر این اساس، پژوهش حاضر با هدف بررسی برهم‎کنش سه نوع آب (شامل آب شهری، آب خاکستری و ترکیب آب شهری و آب خاکستری با نسبت برابر)، 4% جایگزینی سیمان با زئولیت (0، 10، 20 و 30 درصد)، دو سطح مصالح سیمانی (شامل 250 و 350 کیلوگرم بر مترمکعب) و پنج سن عمل­آوری (3، 7، 21، 56 و 90 روز) بر مقاومت فشاری بتن در سه تکرار با ساخت 360 آزمونه بتنی صورت‎گرفت. نظر ‎به تنوع قابل‎ملاحظه تیمارهای آزمایش در این پژوهش و با توجه به عدم تجزیه و تحلیل­های آماری در پژوهش­های قبلی، نتایج پژوهش حاضر در قالب طرح کاملاً تصادفی به‎صورت آزمایش فاکتوریل تحت آزمون­های تجزیه واریانس (ANOVA) و مقایسه میانگین­ها (LSD) قرارگرفت. نتایج نشان داد که استفاده از آب خاکستری و ترکیبی موجب افزایش مقاومت فشاری بتن شد. هم‎چنین، اگرچه کاربرد زئولیت در هر دو عیار سیمان عموماً منجر به کاهش مقاومت فشاری بتن شد، نرخ تغییرات در عیار سیمان 350 کیلوگرم بر مترمکعب به‎مراتب کمتر از عیار سیمان 250 کیلوگرم بر مترمکعب بود، به‎طوری‎که جایگزینی 10، 20 و 30 درصد زئولیت در مقایسه با تیمار عدم‎کاربرد زئولیت در عیار سیمان 250 کیلوگرم بر مترمکعب موجب کاهش مقاومت فشاری به­میزان به‎ترتیب 0/15، 1/26 و 0/34 درصد شد. ولی در عیار سیمان 350 کیلوگرم بر مترمکعب، مقاومت فشاری آزمونه­ها را به­ترتیب 4/2-، 4/5+ و 7/13- درصد تغییر داد. با این‎حال، با توجه به برهم‎کنش معنی­دار این دو عامل با نوع آب، که به‎معنای اثرات متفاوت نوع آب و درصد زئولیت در عیارهای مختلف سیمان است. انتخاب بهترین سطح کاربرد زئولیت و نوع آب با توجه به عیار سیمان موردنظر باید براساس آزمون طرح اختلاط در کارگاه به‎دست آید.}, keywords_fa = {آب نامتعارف,برهم‎کنش,تجزیه واریانس,سن بتن,طرح اختلاط}, url = {https://www.jwwse.ir/article_104525.html}, eprint = {https://www.jwwse.ir/article_104525_8e4cfc2d958706acbe524b6d7603dbd1.pdf} }