@article { author = {Hashemzadeh, Farzad and Akbarzadeh, Abbas}, title = {Evaluation of Submereged Membrane Bioreactor (SMBR) in Municipal and Textile Wastewater Treatment of Shahinshahr, Isfahan}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {7}, number = {3}, pages = {72-84}, year = {2022}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2022.324258.1305}, abstract = {This study aimed to investigate the efficiency of submerged membrane bioreactors (SMBR) in textile and municipal wastewater treatment. First, membrane bioreactors were designed and fabricated using hollow fiber polypropylene membranes with pores of 0.2 μm on a pilot scale with a volume of 100 liters. Then, for 20 days, activated sludge was formed and municipal wastewater was treated. For 28 days, incremental percentages of 20%, 40% 60%, and 80% of textile wastewater were gradually added to municipal wastewater. Finally, for 10 days, the sewage of the textile wool factory was examined. Pilot performance for municipal wastewater at the maximum concentration of MLSS mg/L 2310, percentages of removal of biological parameters COD, BOD, TSS, VSS equal to 94.65%, 96.03%, 96.72%, 95.58%, for mixed wastewater, respectively Urban and textile in MLSS equal to 2920 mg/L, 94.1%, 95.2%, 97%, 95.9% have been reported, respectively. Finally, for textile wastewater with the hydraulic retention time of 25 hours, the sludge retention time of 25 days with MLSS equal to 1370 mg/L, the studied parameters along with color and turbidity were 95.1%, 95.8%, 96.6%, 95%, 93%, 99.8%, respectively. This study showed that SMBR can be used as an efficient method for textile and municipal wastewater treatment.}, keywords = {Activated sludge,Biological Treatment,Membrane bioreactor,Shahinshahr municipal wastewater,Textile wastewater}, title_fa = {بررسی عملکرد بیورآکتور مستغرق غشایی (SMBR) در تصفیه فاضلاب‌های شهری و نساجی شاهین‌شهر اصفهان}, abstract_fa = {هدف از این تحقیق بررسی کارآیی بیوراکتورهای مستغرق غشایی (1SMBR) در تصفیه فاضلاب نساجی و شهری است. ابتدا بیوراکتور غشایی با استفاده از غشاءهای الیاف تو خالی پلی پروپیلن با منافذ 2/0 میکرومتر در مقیاس پایلوت به حجم 100 لیتر طراحی و ساخته شده است. سپس به‎مدت 20 روز برای تشکیل لجن فعال و تصفیه فاضلاب شهری اقدام شد. برای 28 روز به تدریج به فاضلاب شهری، درصدهای صعودی 20%، 40% 60% و 80% فاضلاب نساجی اضافه شده است. در نهایت، به‎مدت 10 روز، فاضلاب کارخانه پشم‎بافی نساجی مورد بررسی قرارگرفت. عملکرد پایلوت برای فاضلاب شهری در حداکثر غلظت MLSS mg/L2310، درصدهای حذف پارامترهای بیولوژیکی COD، BOD، TSS، VSS به‎ترتیب برابر 65/94%، 03/96%، 72/96%، 58/95%، برای فاضلاب مخلوط شهری و نساجی در MLSS برابر mg/L 2920، به‎ترتیب 1/94%، 2/95%، 97%، 9/95% گزارش شده است. در نهایت برای فاضلاب‌ نساجی با زمان ماند هیدرولیکی 25 ساعت، زمان ماند لجن 25 روز باMLSS  برابر mg/L 1370 پارامترهای مورد مطالعه به‎همراه رنگ و کدورت به‎ترتیب 1/95%، 8/95%، 6/96%، 5/95%، 93%، 8/99%، گزارش شده است. این مطالعه نشان داد از SMBR به‌عنوان یک روش کارآمد برای تصفیه فاضلاب نساجی و شهری می‌توان استفاده نمود.}, keywords_fa = {بیوراکتور غشایی,لجن فعال,تصفیه بیولوژیکی,فاضلاب نساجی,فاضلاب شهری شاهین شهر}, url = {https://www.jwwse.ir/article_153249.html}, eprint = {https://www.jwwse.ir/article_153249_b66c4ae98c06b9120da3b28ff448423c.pdf} }