@article { author = {Yousefi Kebria, Daryoush and Sattari, Mohsen}, title = {Investigation of Effective Parameters in the Combined System of Microstrainer and Ozonation in the Removal of Algae from Raw Water}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {7}, number = {3}, pages = {44-52}, year = {2022}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2022.310299.1292}, abstract = {The presence of algae in the water treatment process is problematic. The best way to control algae is to remove the algae cell intact without rupturing the cell, as most common methods cause disinfection by-products, which are often very dangerous. The aim of this study was to evaluate the efficiency of microstrainer and ozonation systems in combined removal of algae from raw water. For this purpose, Box-Behnken Design was used in the Response Surface Methodology by Design Expert software. Experimental variables included input turbidity (50-150 NTU), microstrainer surface load (10.8-18 m/h) and injectable ozone dose (1-3 mg/L). Based on the experimental conditions, the algae removal efficiency in the integrated microstrainer and ozonation system was 39.64-88.76%. The parameters of inlet water turbidity, injected ozone dose and micro-strainer surface load with effect coefficients of 15.37, 8.98 and 4.01, respectively, had the greatest effect on system efficiency in algae removal. Increasing the turbidity and surface load of the microstrainer decreased the algal removal efficiency and increased the injection ozone dose increased the efficiency. The final model based on the desired parameters was obtained as a quadratic equation with correlation coefficient, modified correlation coefficient and predicted correlation coefficient equal to 0.948, 0.928 and 0.868, respectively.}, keywords = {Algae,Box-Behnken design,Microstrainer,Ozonation,raw water,Response Surface Methodology}, title_fa = {بررسی پارامترهای موثر در سیستم تلفیقی میکرواسترینر و ازن‌زنی در حذف جلبک از آب خام}, abstract_fa = {حضور جلبک­ها در فرآیند تصفیه آب، مشکل آفرین است. بهترین روش برای کنترل جلبک­ها، حذف سلول جلبک به‌صورت دست نخورده و بدون پارگی سلول است زیرا بیشتر روش­های معمول، موجب تشکیل فرآورده­های جانبی گندزدایی که غالباً بسیار خطرناک هستند، می­شوند. هدف از این مطالعه بررسی کارایی سیستم‌های میکرواسترینر و ازن‌زنی به‌صورت تلفیقی در حذف جلبک از آب خام است. برای این منظور، از طراحی باکس-بنکن در روش سطح پاسخ به‌وسیله نرم‌افزارDesign Expert  استفاده شد. متغیرهای آزمایش، شامل کدورت ورودی (NTU 50-150)، بار سطحی میکرواسترینر (8/10-18 متر بر ساعت) و دُز ازن تزریقی (1-3 میلی‌گرم بر لیتر) بودند. براساس شرایط آزمایش، راندمان حذف جلبکی در سیستم تلفیقی میکرواسترینر و ازن­زنی از 64/39 تا 76/88 درصد، حاصل شد. پارامترهای کدورت آب ورودی، دُز ازن تزریقی و بار سطحی میکرواسترینر به‌ترتیب با ضرایب اثر 37/15، 98/8 و 01/4 بیشترین تأثیر را بر کارایی سیستم در حذف جلبک داشتند. افزایش کدورت و بار سطحی میکرواسترینر سبب کاهش راندمان حذف جلبک و افزایش دُز ازن تزریقی سبب افزایش راندمان شد. مدل نهایی براساس پارامترهای مورد نظر، به‌صورت یک معادله درجه دو با ضریب همبستگی، ضریب همبستگی اصلاح شده و ضریب همبستگی پیش­بینی شده به‌ترتیب برابر با 948/0، 928/0 و 868/0 به‌دست آمد.}, keywords_fa = {میکرواسترینر,ازن‌زنی,جلبک,آب خام,روش سطح پاسخ,طراحی باکس-بنکن}, url = {https://www.jwwse.ir/article_153246.html}, eprint = {https://www.jwwse.ir/article_153246_a1dd6246f34356992bff76735ddfde55.pdf} }