@article { author = {}, title = {Editorial-JWWSE-2-1-Final}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {2-2}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Editorial-JWWSE-2-1-Final}, keywords = {Editorial,JWWSE,2,1,Final}, title_fa = {سخن سردبیر}, abstract_fa = {سخن سردبیر}, keywords_fa = {سخن سردبیر}, url = {https://www.jwwse.ir/article_57249.html}, eprint = {https://www.jwwse.ir/article_57249_0adec1d524f5739d3cf3475a83327259.pdf} } @article { author = {karami, javad and moghadam, alireza and farid hoseini, alireza and sanie nejad, hosein and ziyaee, ali naghi}, title = {Optimizing Energy Consumption in Pumping Station using by Darwin Scheduler model}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {3-12}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2017.87910.1006}, abstract = {Todays, in addition to the optimal hydraulic design of water distribution networks, the optimization of energy consumption in pumping station is more important for researchers. Due to the energy costs include the major part of operation cost at a water network, in this paper study the optimization of daily energy cost of pumping station with five parallel pumps, using by Darwing scheduler module at WaterGEMS V8i software based on Simple Genetic Algorithm (SGA) and Fast Messy Genetic Algorithm (FMGA). The hydraulic constraints include the minimum pressure and maximum pressure of junctions, maximum velocity of pipes and maximum number of economic off and on of pumps. The results showed that the energy costs reduced 15 and 10 percent using by Simple Genetic Algorithm (SGA) and Fast Messy Genetic Algorithm (FMGA), respectively, with regard to electricity tariffs in To optimize the performance was achieved without pumps.so we achive 10 and15persent reduce energy cost}, keywords = {water distribution networks,optimization,genetics algorithm,Darwin Scheduler}, title_fa = {بهینه‌سازی مصرف انرژی در ایستگاه‌های پمپاژ با استفاده از ابزار Darwin Scheduler}, abstract_fa = {امروزه در شبکه‌های توزیع آب شهری علاوه بر انجام طراحی بهینه هیدرولیکی، بهینه‌سازی مصرف انرژی در ایستگاه‌های پمپاژ در راس الزامات محققان قرار گرفته است. با توجه به اینکه هزینه‌های انرژی سهم بالایی از هزینه بهره برداری از شبکه را شامل می‌شود، در این پژوهش به کمک ابزار Darwin Scheduler در نرم افزار WaterGEMS V8i نسبت به بهینه‌سازی با هدف کمینه کردن هزینه انرژی مصرفی روزانه یک ایستگاه پمپاژ شامل پنج عدد پمپ‌ موازی در یک شبکه توزیع آب شهری، به کمک الگوریتم ژنتیک ساده (SGA) و الگوریتم ژنتیک با آشفتگی سریع(FMGA) اقدام شده است. قیود هیدرولیکی شامل حداقل و حداکثر فشار در هر گره، سرعت حداکثری در هر لوله و تعداد دفعات خاموش و روشن شدن اقتصادی پمپ‌ها می باشد که در نتیجه کاهش هزینه‌های انرژی با استفاده از الگوریتم های SGA و FMGA به ترتیب به میزان ‌ 15 و 10 درصد با اعمال تعرفه برق مصوب، نسبت به عملکرد پمپ ها بدون اعمال بهینه سازی حاصل گردید.}, keywords_fa = {شبکه‌های توزیع آب,بهینه‌سازی,الگوریتم ژنتیک,داروین اسکجولر}, url = {https://www.jwwse.ir/article_55715.html}, eprint = {https://www.jwwse.ir/article_55715_660ee19dcc62326cb8f044b6d58a5ea2.pdf} } @article { author = {Rashidzadeh, Mehrdad}, title = {evaluation of economic efficiency of low thickness light ductile iron pipe in comparison with polymeric and composite pipes}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {13-20}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2017.87950.1007}, abstract = {Technical characteristics should be matched with desired performance. Investigation of cost effectiveness of pipe materials in short and long term usages is essential. In some cases, a pipe material has low cost and it seems more cost effective than other pipes but repair and maintenance cost is more than other pipes. Ductile iron pipes have some advantages in comparison with plastic, steel and GRP pipes but in the field of weight and cost effectiveness, there are some critics. New developments led to introduction of new generation of ductile iron pipe. Light & Low thickness ductile iron pipe that can plug to plastic pipes easily or replaced by damaged plastic pipes in pipelines is the new solution that represented according to the last developments in ductile iron pipes production technology. It is very reasonable to use this kind of ductile iron pipe in comparison with other pipe materials. Economic reviews show that use of low thickness ductile iron pipe can improve the cost effectiveness factor to about 50% in comparison with common ductile iron pipes. Low thickness ductile iron pipes are really light, resistant to corrosion, little head loss in pipe line, easy tapping with restriction of illegal tapping, compatibility with plastic pipes and low leak tightness that happens in pipelines can achieve about 20% cost reduction.}, keywords = {Pipe,Ductile iron,Low thickness Pipes,Light weight}, title_fa = {بررسی صرفه اقتصادی استفاده از لوله های جداره نازک چدن نشکن در مقایسه با لوله های پلیمری و کامپوزیتی}, abstract_fa = {پیشرفت های جدید باعث شده است که نسل جدیدی از لوله های چدن نشکن با عنوان لوله های چدن نشکن جداره نازک سبک به بازار مصرف معرفی شوند. این لوله ها از لحاظ سایز کاملاً با لوله های پلیمری مطابقت داشته و قابلیت اتصال به لوله های پلیمری را دارند. نتایج تحقیق ننشان می دهد که استفاده از لوله های چدن نشکن جداره نازک می تواند تا 50% کاهش هزینه را نسبت به استفاده از لوله های چدن نشکن متداول به همراه داشته باشد. از لحاظ کاربردی برآوردها نشان می دهد که لوله های جداره نازک چدن نشکن با توجه به وزن سبک، مقاومت به خوردگی بالا، میزان بسیار کم افت فشار در شبکه، انشعاب گیری آسان در عین جلوگیری از انشعاب گیری های غیرقانونی، همخوانی با لوله های پلی اتیلنی و آمار بسیار پایین بروز نشتی در خطوط لوله به طور متوسط 20% کاهش هزینه را به همراه خواهد داشت.}, keywords_fa = {لوله,چدن نشکن,جداره نازک,سبک}, url = {https://www.jwwse.ir/article_55717.html}, eprint = {https://www.jwwse.ir/article_55717_5e4d4b9f1bdd67aaf71b28fd2bb012af.pdf} } @article { author = {analouei, razieh and Taheriyoun, Masoud and safavi, hamidreza}, title = {Reliability analysis of wastewater treatment plant and recycling of industrial Wastewater Treatment Plant of Industrial complex of Moorchekhort by using Bayesian networks}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {21-27}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2017.87566.1011}, abstract = {Nowadays, the using of treated wastewater in diverse purposes such as agriculture, industry and irrigation is converted to an appropriate solution for water shortage. Despite the advantages of water reuse, due to various pollutants in wastewater and lack of complete treatment in accordance with the standards, it is always risky. Therefore risk assessment should be conducted in order to determine the reliability of system and offer solutions to enhance the reliability of wastewater treatment system. Risk is the possibility of occurrence an adverse event and the severity of the negative effects of it. In the present study, Bayesian network approach is used for risk assessment of wastewater treatment plant. In this method the possibility of an event can be obtained by creating cause and effect relationship between the components of the system. Wastewater treatment plant of industrial complex of Moorchekhort is selected for case study in this study. The fouling, corrosion and biofilm of using treated wastewater for industry have been determine as final events. The model input datas have been formed by experts, specialists and laboratory datas from wastewater treatment plant of industrial complex of Moorchekhort. The reliability of wastewater treatment system analyzed by Bayesian network model showed %70. The efficiency of Bayesian network in order to determine elements of failure and estimate the risk of wastewater treatment system that is not adapted to effluent standards for the industry is shown in this study.}, keywords = {Wastewater Treatment Plant,Risk and reliability assessment,Bayesian network model,Water Reuse}, title_fa = {تحلیل اطمینان‌پذیری سیستم تصفیه و بازیافت پساب شهرک صنعتی مورچه‌خورت با استفاده از روش شبکه بیزی}, abstract_fa = {امروزه استفاده از فاضلاب تصفیه‌شده در بخش های مختلفی از قبیل کشاورزی ، صنعت و آبیاری فضای سبز به راه‌حلی مناسب برای جبران کمبود آب تبدیل‌شده است. به دلیل احتمال وجود آلاینده‌های مختلف در فاضلاب و عدم تصفیه کامل منطبق بر استانداردها ، این امر همواره با ریسک و عدم اطمینان همراه است. لذا به‌منظور تعیین وضعیت اطمینان پذیری و ارائه راهکارهای ارتقاء آن در سیستم تصفیه فاضلاب ، بایستی ارزیابی ریسک صورت گیرد. ریسک بیانگر احتمال وقوع یک رخداد نامطلوب به همراه شدت اثرات منفی آن می باشد. در تحقیق حاضر از روش شبکه بیزی برای ارزیابی ریسک سیستم تصفیه فاضلاب استفاده‌شده است. در این روش با ایجاد رابطه علت و معلولی بین اجزاء سیستم ، می توان احتمال رخداد یک رویداد در سیستم را به دست آورد. مطالعه موردی در این پژوهش ، سیستم تصفیه فاضلاب شهرک صنعتی مورچه‌خورت است. رویداد نهایی موردبررسی در مدل، ایجاد پیامد رسوب ، خوردگی و بیوفیلم حاصل از استفاده پساب در تأسیسات صنعتی شهرک صنعتی می باشد. داده های ورودی به مدل از طریق نظرات کارشناسان و متخصصان و داده های آزمایشگاهی تصفیه‌خانه شهرک صنعتی مورچه‌خورت تهیه‌شده است. نتایج نشان می دهد که با احتمال 70 درصد سیستم تصفیه فاضلاب قادر به تأمین پساب باکیفیت مناسب برای مصارف صنعتی خواهد بود. همچنین کار آیی مدل شبکه بیزی در تحلیل عوامل شکست و تخمین ریسک ناشی از عدم تطابق پساب خروجی با استانداردهای موردنظر صنایع نشان داده‌شده است.}, keywords_fa = {تصفیه‌خانه فاضلاب,ارزیابی ریسک و اطمینان‌پذیری,روش شبکه بیزی,پساب}, url = {https://www.jwwse.ir/article_55720.html}, eprint = {https://www.jwwse.ir/article_55720_7c0b0131abd8650e6a9bc6aaaa8d5fe0.pdf} } @article { author = {Sarrafzadeh, Mohammad Hossein}, title = {Technical and economic aspects of water desalination worldwide}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {28-37}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2017.89834.1030}, abstract = {As a consequence to global warming and climate change all around the world and irregular consumption of underground water resources, the societies are being faced to a serious dangers named water scarcity. Population growth, need to food security, climate changes and agricultural needs have forced the societies to search for appropriate alternatives for fresh water resources. Unconventional water resources are known as one of the most important alternatives for fresh water on the earth. One of the most sources of unconventional waters is saline or brackish water. Considering the great amount of saline water on the earth, water desalination can be a fruitful method to overcome the crisis of water scarcity. Water desalination technologies will be categorized into two main groups of thermal and membrane technologies. In this paper, at first the most important and most applicable desalination technologies around the world are studied, then the influences of desalination technologies regarding energy and economy have been evaluated. At the end, the examples of desalination units in different parts of the world have been studied.}, keywords = {Desalination,seawater,Membrane,Energy}, title_fa = {ارزیابی فنی و اقتصادی روش‌های نمک‌زدایی از آب دریا با در نظر گرفتن ویژگیهای بومی در نقاط مختلف دنیا}, abstract_fa = {با افزایش میانگین دمای کره زمین و به وجود آمدن تغییر اقلیم و همچنین مصرف بی‌رویه آب‌های زیرزمینی، جوامع امروزی با خطری بسیار اساسی و مهم به نام کمبود آب مواجه شده‌اند. رشد جمعیت، نیاز به امنیت غذایی، تغییرات اقلیمی و نیازهای کشاورزی جوامع بین‌المللی را مجبور به جستجو برای منابع جایگزین آب کرده است. منابع آب نامتعارف، جایگزین‌هایی هستند که برای منابع آب شیرین موجود در کره زمین، معرفی‌شده‌اند. یکی از مهم‌ترین منابع آب نامتعارف، آب‌های شور و لب‌شور به شمار می‌آیند. با توجه به وجود منابع عظیم آب شور در کره زمین، نمک‌زدایی آب روشی کارآمد برای غلبه بر بحران کم‌آبی به‌حساب می‌آید. فرایندهای نمک‌زدایی به دو دسته کلی فرایندهای گرمایی و فرایندهای غشایی تقسیم می‌شود. در این مقاله ابتدا به بررسی روش‌های مهم و پرکاربرد در سطح جهان پرداخته و سپس اثرات فرایند نمک‌زدایی از منظر اقتصاد و انرژی در روش‌های مختلف و متداول این فرایند موردبررسی قرار می‌گیرد. درنهایت نمونه واحدهای نمک‌زدایی در نقاط جغرافیایی مختلف جهان از این حیث بررسی خواهد شد.}, keywords_fa = {نمکزدایی,آب دریا,غشا,انرژی}, url = {https://www.jwwse.ir/article_55723.html}, eprint = {https://www.jwwse.ir/article_55723_8c86d172cc7a495292e7efcfbc30b9e1.pdf} } @article { author = {Parhizkar, Farshid and Pourali, Omid}, title = {Optimization of power-water cogeneration in thermal power plants}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {38-45}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2017.87963.1029}, abstract = {In recent years, due to the overuse of natural water resources and increase in the demand of water, various methods of water desalination have attracted enormous interest. In order to supply drinking and industrial water, seawater desalination process can be used as a suitable method. Thermal power plants are one of the major water consumer industries that a lot of them are located in the coastal areas; therefore, power and water can be simultaneously generated using cogeneration technique, and consequently increase the efficiency of the existing power plants. In this paper, cogeneration of power (in an existing thermal power plant) and water (using the steam extraction turbine outlet of the existing power plant) has been investigated. According to the obtained results, it was understood that desalinated water production by a combination of reverse osmosis and thermal desalination (multi-stage flash distillation (MSF)) at flow rates higher than 800 m3/h is economically feasible.}, keywords = {Power-water cogeneration,Desalination,optimization,Genetic Algorithm}, title_fa = {بهینه سازی تولید همزمان آب شیرین و توان در نیروگاه های حرارتی}, abstract_fa = {در سال های اخیر با توجه به برداشت های بیش از حد از منابع طبیعی آب شیرین و افزایش مصرف آن، روش های متنوع شیرین سازی آب بسیار مورد توجه قرار گرفته اند. به منظور تامین آب آشامیدنی و آب مصرفی واحدهای صنعتی، می توان از فرآیند شیرین سازی آب دریا به عنوان یک روش مناسب استفاده نمود. نیروگاه های حرارتی یکی از مهمترین صنایع مصرف کننده آب هستند که تعداد قابل ملاحظه ای از آنها در مجاورت دریاها قرار دارند؛ بنابراین، با بهره گیری از علم تولید همزمان می توان توان و آب شیرین را به صورت همزمان تولید نمود و به دنبال آن، راندمان کلی نیروگاه های موجود را افزایش داد. در این مقاله تولید همزمان توان (در یک نیروگاه حرارتی موجود) و آب شیرین (با استفاده از خروجی توربین بخار زیرکش دار آن نیروگاه) بررسی شده است. بر اساس نتایج به دست آمده، تولید آب شیرین با ترکیبی از آب شیرین کن های اسمز معکوس و حرارتی (MSF) در دبی های بیشتر از800 m3/h توجیه اقتصادی دارد.}, keywords_fa = {تولید همزمان آب و توان,شیرین سازی آب,بهینه سازی,الگوریتم ژنتیک}, url = {https://www.jwwse.ir/article_55724.html}, eprint = {https://www.jwwse.ir/article_55724_83e5e17a57b03ce92c1a309393b44858.pdf} } @article { author = {Ghane, Ali Asghar and Ghannadi, Majid}, title = {Pathology and Development Strategies and Expedition of Wastewater Projects Implementation}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {46-51}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2017.92634.1038}, abstract = {A review of the twenty years of experience in the implementation of wastewater projects in the country shows that in spite of many efforts and achieving the 46.18 percent of urban population utilizing modern sewage services, it is necessary to study the pathology of the implemented plans, the grounds for obtaining solutions tailored to the needs of the country and accelerate the comprehensive coverage of modern sewage services. Failure to pay attention to technical and economic justification in the studies of projects and the significant number of half-finished projects and unused capacities are among general harms resulted from sewage projects in the country to which the poor quality of effluent and the low efficiency of the treatment processes in some of the implemented projects should be added. Paying attention to the issue of economic market and effluent tariffs, transparency in effluent marketing and usage policies, the creation of appropriate patterns commensurate with the climate and operational capability, and the management of the maintenance and updating of facilities and manpower operating them, along with the creation of a ground for private sector to participate in implementing and managing projects are topics ahead of this section.}, keywords = {"wastewater plans","Pathology","Development"}, title_fa = {آسیب شناسی اجرا و توسعه طرح های فاضلاب در ایران}, abstract_fa = {مروری بر تجربه‌های برآمده از بیست و چند سال اجرای طرح‌های فاضلاب در کشور نشان می‌دهد که به رغم تلاش‌های فراوان انجام شده و نیل به شاخص 81/46 درصد جمعیت شهری بهره‌مند از خدمات مدرن فاضلاب، لازم است با آسیب‌شناسی طرح‌های اجرا شده، زمینه برای حصول راهکارهای متناسب با شرایط کشور و مآلاً تسریع در پوشش فراگیر خدمات مدرن فاضلاب فراهم آید. عدم توجه به توجیه فنی و اقتصادی در مطالعات طرح‌ها، شمار قابل توجه طرح‌های نیمه تمام و ظرفیت‌های بلا استفاده ایجاد شده، از جمله آسیب‌های عمومی طرح‌های فاضلاب در کشور است که بر آن کیفیت نامطلوب پساب و کارآمدی پایین فرآیندهای تصفیه در برخی طرح‌های اجرا شده را باید بر آن افزود. توجه به موضوع بازار اقتصادی و تعرفه‌های پساب، شفافیت‌ در سیاست‌های بازیابی و کاربری پساب، ایجاد الگوهای متناسب با وضعیت اقلیمی و توان اجرایی و راهبری، آسیب‌شناسی نگهداری و به روزآوری تأسیسات و نیروی انسانی راهبر آن، به همراه زمینه‌سازی برای همراه ساختن بخش خصوصی در اجرا و راهبری طرح‌ها، از جمله موضوع‌های پیش روی این بخش است.}, keywords_fa = {"طرح‌های فاضلاب","آسیب‌شناسی","توسعه"}, url = {https://www.jwwse.ir/article_55725.html}, eprint = {https://www.jwwse.ir/article_55725_bfcff980c8a12d7716dc28d0a496cfea.pdf} } @article { author = {}, title = {Experience- JWWSE-2-1-Final}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {52-55}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Grit chamber unit is used to separate and remove suspending non-organic particles such as gravel, sand, seeds and other solids with faster sedimentation rates than perishable particles in sewage as well as scum and fat removal. Grit recycling in aerated grit chambers of wastewater treatment plants leads to a better management of treatment plants and minimizes the operational problems. In this study, the performance of European and American designed aerated grit chambers was compared with each other. The results indicated that the use of grit chambers designed by European standards, not only reduces the cost of initial investment and equipment, but also minimizes the operational problems in other treatment units and in general, it increases the .efficiency of treatment plants}, keywords = {Aerated grit chamber,American standard,European standard,Grit removal,Wastewater Treatment Plant}, title_fa = {تجربه کاربردی}, abstract_fa = {Experience- JWWSE-2-1-Final}, keywords_fa = {experience,JWWSE,2,1,Final}, url = {https://www.jwwse.ir/article_57251.html}, eprint = {https://www.jwwse.ir/article_57251_f4037de23ed2298522f1493a62ebce0e.pdf} } @article { author = {}, title = {Idea Recall-JWWSE-2-1-Final}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {55-55}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Idea Recall-JWWSE-2-1-Final}, keywords = {Idea Recall,JWWSE,2,1,Final}, title_fa = {فراخوان ایده کاوی}, abstract_fa = {Idea Recall-JWWSE-2-1-Final}, keywords_fa = {Idea Recall,JWWSE,2,1,Final}, url = {https://www.jwwse.ir/article_57252.html}, eprint = {https://www.jwwse.ir/article_57252_3a7925672b095c01fa582f7fdb87f7ba.pdf} } @article { author = {}, title = {Interview-JWWSE-2-1-Final}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {56-60}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Interview-JWWSE-2-1-Final}, keywords = {Interview,JWWSE,2,1,Final}, title_fa = {مصاحبه}, abstract_fa = {Interview-JWWSE-2-1-Final}, keywords_fa = {Interview,JWWSE,2,1,Final}, url = {https://www.jwwse.ir/article_57253.html}, eprint = {https://www.jwwse.ir/article_57253_95d3c35367f8c26a35ff447ce5f42b1d.pdf} } @article { author = {}, title = {Best Tech-JWWSE-2-1-Final}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {61-63}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Best Tech-JWWSE-2-1-Final}, keywords = {Best Tech,JWWSE,2,1,Final}, title_fa = {ایده برتر}, abstract_fa = {Best Tech-JWWSE-2-1-Final}, keywords_fa = {Best Tech,JWWSE,2,1,Final}, url = {https://www.jwwse.ir/article_57254.html}, eprint = {https://www.jwwse.ir/article_57254_d2a6a6c1c6f1f862fa7e070078955209.pdf} } @article { author = {}, title = {Book Introducing-JWWSE-2-1-Final}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {64-64}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Book Introducing-JWWSE-2-1-Final}, keywords = {Book Introducing,JWWSE,2,1,Final}, title_fa = {معرفی کتاب}, abstract_fa = {Book Introducing-JWWSE-2-1-Final}, keywords_fa = {Book Introducing,JWWSE,2,1,Final}, url = {https://www.jwwse.ir/article_57255.html}, eprint = {https://www.jwwse.ir/article_57255_688f34fad03f504d3e978fea8cf6535f.pdf} } @article { author = {}, title = {General Items-JWWSE-2-1-Final}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {2}, number = {1}, pages = {65-76}, year = {2017}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {General Items-JWWSE-2-1-Final}, keywords = {General Items,JWWSE,2,1,Final}, title_fa = {مطالب عمومی}, abstract_fa = {General Items-JWWSE-2-1-Final}, keywords_fa = {General Items,JWWSE,2,1,Final}, url = {https://www.jwwse.ir/article_57256.html}, eprint = {https://www.jwwse.ir/article_57256_62de53a41ef2aed150a5cd99df215f5b.pdf} }