@article { author = {}, title = {Preface}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {2-3}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Preface}, keywords = {Preface}, title_fa = {پیشگفتار}, abstract_fa = {پیشگفتار}, keywords_fa = {Preface}, url = {https://www.jwwse.ir/article_118420.html}, eprint = {https://www.jwwse.ir/article_118420_ba2bd7bc8c75a25a398a1c3545a951a6.pdf} } @article { author = {Shafiei, Mojtaba and Majidi, Maysam and Gharesifard, Mohammad and Tavakoli Aminian, Samaneh and Ghanbari, Fariba}, title = {An Overview on Research and Innovation in Water Sector of Iran: the Necessity of Paradigm Shifts}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {4-13}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2020.184826.1158}, abstract = {As illustrated by World Economic Forum, the developed and developing countries are differentiated by the relevance of their economy to Innovation. Innovation is the engagement of many different individual and institutional actors and one of its key elements, is research. Global index confirmed that Iran is not high ranked with regards to innovation and the country showed its most success in presenting scientific papers. Although in the field of water there are some significant enhancements but the activities have not played an effective contribution in solving the existing challenges. This review note is reporting the importance of research and innovation in water management studies as well as the role of Iranian Innovation System in the same. The two main challenges which are addressed in this study are the weakness of institutional frameworks and the low efficiency of research actors/stakeholders. Results also showed that although there are many different high-level documents in this context in Iran, most of strategies and processes of research organizations or the influential stakeholders are not coinciding such documents and need revision. Furthermore, one of the key solutions for improving the research and innovation effectiveness is the relationship and engagement between the three elements of the national innovation system (i.e. universities, industries and government) such that the mobility of people among these elements would help to increase knowledge, skills, experiences and the “tacit knowledge” in form of a horizontal open engagement.}, keywords = {Tacit knowledge,Research network,sustainable development,Innovation,High-level Documents}, title_fa = {مروری کوتاه بر وضعیت «پژوهش» و «نوآوری» در ایران، با تاکید بر بخش آب: ضرورت تغییر رویکردها}, abstract_fa = {براساس گزارش مجمع جهانی اقتصاد وجه تمایز کشورهای توسعه یافته با کشورهای در حال توسعه مبتنی بودن اقتصاد آن‎ها بر نوآوری است. پژوهش یکی از مولفه‌های فرآیند نوآوری به‎شمار می‌رود و نوآوری نتیجه تعاملات فراوان و فزاینده بین نهادهای مختلف است. شاخص‌های جهانی نشان می‌دهد که در حوزه نوآوری، ایران رتبه قابل‎قبولی ندارد و تنها در حوزه تولید علم (تولید مقاله) موفقیت‌هایی داشته است. در همین راستا در بخش ‌آب نیز دستاوردهای اندکی در زمینه پژوهش و نوآوری وجود دارد و این فعالیت‌ها نقش کمی در رفع نیازهای واقعی جامعه داشته‌اند. متن مروری حاضر به ارائه گزاره‌های مختلف در مورد اهمیت، ارتباط و نقش پژوهش در توسعه و نظام ملی نوآوری، به‎همراه ارائه چالش‌ها و ظرفیت‌های موجود در ارتقای پژوهش و نوآوری با تاکید بر بخش آب پرداخته است. در این نوشتار دو چالش کلان شامل ضعف چارچوب نهادی و ضعف عملکردی بازیگران عرصه پژوهش با توجه به مفهوم نظام نوآوری و بررسی تجارب موجود ارائه شده است. نتایج نشان می‌دهد در زمینه اثرگذاری و اشاعه پژوهش در کشور و در وزارت نیرو، اسناد بالادستی متعدد و مهمی وجود دارند که باید راهبردها و فرآیندهای سازمان‌های ذی‌مدخل در راستای آن‎ها تعریف و یا اصلاح شوند. هم‎چنین از مهم‌ترین راه‌کارهای ارتقای فعالیت‌های پژوهش و نوآوری توجه به ساختار ارتباط اجزای سه‌گانه نظام نوآوری (شامل دانشگاه، صنعت و دولت) و تعامل آن‎ها است. به‎طوری‎که گردش افراد بین سه جز مذکور بسیار اهمیت دارد، زیرا افراد با خود دانش و مهارت و به‎طور کلی دانش ضمنی را منتقل می‌کنند.}, keywords_fa = {Tacit knowledge,Research network,sustainable development,Innovation,High-level Documents}, url = {https://www.jwwse.ir/article_118427.html}, eprint = {https://www.jwwse.ir/article_118427_52bf6d96a078c2200d5664c83748c5f2.pdf} } @article { author = {Garmeh, Emad and Ghamari, Misagh and Gooklani, Avazverdy}, title = {Investigation of the Absorption of Metallic and Non-Metallic Constituents from Water Used in Jajarm Alumina Factory Using Two Types of Nano Alumina}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {14-20}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2020.192157.1162}, abstract = {Due to the adverse effects of some metallic and non-metallic components on water properties, this paper describes the absorption of calcium, iron, silica, chlorine and water hardness from the water used in Jajarm alumina factory by using two types of alumina nanopowders. Both types of nano-alumina have similar properties except that they are made in two different ways. The time parameter was selected as the main variable in the adsorption process. To do this, first a certain amount of alumina nanoparticles were placed in a certain amount of water consumed by the alumina plant and then the sample was placed on magnetic stirrer for 60, 120, 180, 240, 360 and 480 minutes for complete homogenization. The temperature of the solutions was constant at 25 °C and the pH of the solutions was constant at 7.6. The results showed that the average absorption percent of silica, iron, calcium, hardness and chlorine by alumina A1 and A2 were 89.73-35, 100-100, 29.73- 32.43, 11.22-16.45 and 10.37-6.67, respectively. As the contact time increases, the adsorption increases. The results of the experiments also showed that alumina nanopowder can be used as an effective method for absorbing the mentioned species and reducing the hardness of aqueous solutions.}, keywords = {Adsorption,Chlorine,Hardness,Iron,Silica}, title_fa = {بررسی قابلیت کاهش سختی، کلسیم، آهن، سیلیس و کلرور از آب مورد استفاده در کارخانه آلومینای جاجرم با استفاده از دو نوع نانو آلومینا}, abstract_fa = {با توجه به اثرات نامطلوب برخی اجزای فلزی و غیر فلزی بر خواص آب، این مقاله جذب اجزای کلسیم، آهن، سیلیس، کلرور و سختی از آب مورد استفاده در کارخانه آلومینای جاجرم را با استفاده از دو نوع نانو پودر آلومینا شرح می‎دهد. هر دو نوع نانو آلومینا خواص مشابهی دارند با این تفاوت که از دو روش متفاوت ساخته شده‎اند. پارامتر زمان به‎عنوان متغیر اصلی در فرآیند جذب انتخاب شد. برای این کار ابتدا مقدار مشخصی از نانو ذرات آلومینا در مقدار مشخصی از آب مصرفی کارخانه آلومینا  قرارگرفته و سپس برای همگن‎سازی کامل، نمونه در مدت زمان‎های60، 120، 180، 240، 360 و 480 دقیقه روی هم‎زن مغناطیسی قرارگرفت. دمای محلول‎ها ثابت و برابر با 25 درجه سانتی‎گراد و pH محلول‎ها نیز در تمام نمونه‎ها ثابت و برابر 6/7 بود. نتایج نشان داد که میانگین درصد جذب سیلیس، آهن، کلسیم، سختی و کلروراید توسط آلومینای A1 و A2 به‎ترتیب 73/89-35، 100-100، 73/29-43/32، 22/11-45/16 و 37/10-67-6 است. با افزایش زمان تماس، میزان جذب افزایش می‌یابد. هم‎چنین نتایج حاصل از انجام آزمایش‎ها مشخص کرد که می‎توان از نانو پودر آلومینا به‎عنوان یک روش مؤثر برای جذب گونه‎های اشاره شده و کاهش سختی از محلول‎های آبی استفاده کرد.}, keywords_fa = {Adsorption,Chlorine,Hardness,Iron,Silica}, url = {https://www.jwwse.ir/article_118429.html}, eprint = {https://www.jwwse.ir/article_118429_ef9fb00878fab3826ba3747ab8315ef0.pdf} } @article { author = {karimipour, ahmadreza and Banitalebi, Golnoosh}, title = {Evaluation of Different Evapotranspiration Methods, Optimizing the Best Model Based on Multivariate Linear Regression in Cold Moderate and Semi-Humid Climates}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {21-38}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2020.194967.1163}, abstract = {ET0 plays an essential role in water resources management. In this study, nine temperature-based, ten radiation-based and six mass transfer-based methods at three-time scales (monthly, seasonal, and annual) were evaluated versus the FAO56-PM model, and the best and worst methods were selected from each group for the cold moderate and semi-humid climate of Iran. At annual and seasonal time scales (spring, summer and autumn seasons) Hargreaves-M4 and Trajkovic methods (temperature-based methods), Priestley-Taylor and IRMAK1 equations (radiation-based methods) in winter season and for monthly time scale: Meyer and Rohwer, Hargreaves-M4, Trajkovic, IRMAK1, and Priestley-Taylor methods were shown to have the best performance in comparison to FAO56 PM. These equations are the best ET0 estimators in cold moderate, and semi-humid climate. In this study, two equations with the best performance, namely Hargreaves-M4 and Trajkovic were optimized as linear and power functions. The results showed that the power equation had better performance than the linear equation. Finally, two equations were presented based on the linear multivariate regression to simplify ET0 estimation. The results revealed that those kinds of equations, which used Tmax, Tmin as input parameters have high accuracy in comparison with Hargreaves-M4 and Trajkovic equations.}, keywords = {ET0,FAO56-PM,Multivariate linear regression,optimization}, title_fa = {ارزیابی روش‎ های مختلف برآورد تبخیر و تعرق، ارائه مدل‎ های بهینه براساس رگرسیون خطی چند متغیره در اقلیم‎ های نیمه مرطوب معتدل سرد}, abstract_fa = {تبخیر و تعرق نقش مهمی در مدیریت منابع آب ایفا می‎کند. در این مطالعه 9 روش برپایه درجه حرارت، 10 روش برپایه تشعشع و 6 روش برپایه انتقال جرم در سه مقیاس زمانی (ماهانه، فصلی و سالانه) در مقایسه با روش FAO56-PM مورد ارزیابی قرار گرفتند و بهترین روش از هر گروه برای اقلیم نیمه مرطوب معتدل سرد ایران انتخاب شدند. در میان روش‎های برپایه درجه حرارت، دو روش Hargreaves-M4 و Trajkovic در مقیاس‎های زمانی سالانه و فصلی (بهار، تابستان و پاییز)، در بین روش‎های برپایه تشعشع، روش‎های Taylor-Priestley و IRMAK 1 در فصل زمستان و در مقیاس زمانی ماهانه روش‎های Meyer، Rohwer، Hargreaves-M4، Trajkovic، IRMAK 1 و Taylor-Priestley دارای بهترین عملکرد در مقایسه با FAO56-PM بودند. از این روش‎ها می‎توان به‎عنوان بهترین تخمین‎گر ET0 در نواحی با اقلیم نیمه مرطوب معتدل سرد نام برد. در این مطالعه دو معادله با بهترین عملکرد با نام‎های Hargreaves- M4 و Trajkovic به‎صورت خطی و توانی بهینه و مورد بررسی قرار گرفتند. نتایج نشان داد که معادلات توانی عملکرد بهتری نسبت به معادلات خطی دارند. در نهایت این دو معادله براساس رگرسیون خطی چند متغیره برای سادگی در تخمین ET0 ارائه شدند. نتایج مربوط به این دو معادله نشان داد که استفاده از پارامتر دما به‎عنوان پارامتر ورودی منجر به دقت بالاتر در برآورد ET0 در مقایسه با روش‎های Hargreaves-M4 و Trajkovic می‎شود.}, keywords_fa = {ET0,FAO56-PM,Multivariate linear regression,optimization}, url = {https://www.jwwse.ir/article_110828.html}, eprint = {https://www.jwwse.ir/article_110828_3a88f9cd5f905a18ce636491406c9f8d.pdf} } @article { author = {Shirzad, Akbar and Heidarzadeh, Moharram and Mohammadi, Mirali}, title = {Providing Hydraulic Model and Evaluating Reliability of Water Distribution Networks (Case Study: Oshnaviyeh City)}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {39-47}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2020.201614.1169}, abstract = {Reliability is one of the important parameters in the process of design and operation of water distribution networks. Reliability index refers to the ability of the water distribution network to supply water with standard quality, sufficient quantity and within the appropriate pressure range for consumers under normal and abnormal operating conditions. Although many indicators have been provided by various researchers to evaluate the reliability of water distribution networks, so far this issue has not been taken into consideration by consulting engineers and water and wastewater companies in the design and operation of real water distribution networks. In this study, after preparing a calibrated hydraulic model for water distribution network of Oshnaviyeh city in West Azarbaijan province, the reliability of the mentioned network was evaluated. According to the results, the average reliability index of the water distribution network of Oshnaviyeh city during the day is 38.3, which means stressful operating condition. Examination of the reasons for the low reliability led to the identification of weaknesses of this network such as inappropriate diameter of some pipes, weakness in implementing pressure management program, inappropriate status of pipe loops and high amount of leakage (about 52 l/s). Improving the reliability of the studied water distribution network requires the implementation of rehabilitation and renovation programs based on the suggestions proposed in this paper. The results of this study showed that by evaluating the reliability of water distribution networks, existing weaknesses would be identified and their serviceability level would be improved and customer satisfaction would be increased.}, keywords = {water distribution networks,Hydraulic Model,Calibration,Reliability,WaterGEMS software}, title_fa = {تهیه مدل هیدرولیکی و ارزیابی قابلیت اطمینان شبکه‎ های توزیع آب (مطالعه موردی: شهر اشنویه)}, abstract_fa = {قابلیت اطمینان یکی از پارامترهای مهم در فرایند طراحی و بهره‎برداری از شبکه‎های توزیع آب است. شاخص قابلیت اطمینان به توانایی شبکه توزیع آب در تأمین آب با کیفیت استاندارد، به مقدار کافی و در محدوده فشار مناسب برای مصرف‎کنندگان تحت شرایط بهره‎برداری نرمال و غیر‎نرمال اطلاق می‎شود. اگر چه شاخص‎های زیادی توسط محققین مختلف برای ارزیابی قابلیت اطمینان شبکه‎های توزیع آب ارائه شده است، اما تاکنون این موضوع در طراحی و بهره‎برداری از شبکه‎های واقعی توزیع آب توسط شرکت‎های مهندسین مشاور و شرکت‎های آب و فاضلاب مورد توجه قرار نگرفته است. در این پژوهش پس از تهیه مدل هیدرولیکی کالیبره شده برای شبکه توزیع آب شهر اشنویه واقع در استان آذربایجان‎غربی، اقدام به ارزیابی قابلیت اطمینان شبکه مذکور شد. بر اساس نتایج به‎دست آمده مقدار متوسط شاخص‎ قابلیت اطمینان شبکه توزیع آب شهر اشنویه در طول شبانه‎روز برابر با 3/38 بود که به معنی وضعیت بهره‎برداری پرتنش است. بررسی دلایل پایین بودن قابلیت اطمینان منجر به شناسایی نقاط ضعف و نارسایی این شبکه شد که از جمله آن‎ها‎ می‎توان به قطر نامناسب برخی لوله‎ها، ضعف و نارسایی در اجرای برنامه مدیریت فشار، وضعیت نامناسب بخش حلقوی شبکه و مقدار بالای نشت از شبکه (حدود 52 لیتر در ثانیه) اشاره نمود. ارتقای قابلیت اطمینان شبکه توزیع آب مورد مطالعه مستلزم اجرای برنامه‎های اصلاح و نوسازی شبکه بر اساس پیشنهادات ارائه شده در این مقاله خواهد بود. نتایج این پژوهش نشان داد که با ارزیابی قابلیت اطمینان شبکه‎های توزیع آب می‎توان نقاط ضعف موجود را شناسایی نموده و نسبت به ارتقاء سطح سرویس‎دهی آن‎‎ها و افزایش رضایت‎مندی مشترکین اقدام نمود.}, keywords_fa = {water distribution networks,Hydraulic Model,Calibration,Reliability,WaterGEMS software}, url = {https://www.jwwse.ir/article_118431.html}, eprint = {https://www.jwwse.ir/article_118431_c3181c350bdc4170f5b73301ff5384dc.pdf} } @article { author = {Eftekhari, Mobin and Akbari, Mohammad}, title = {Cost Evaluation of Meta- Heuristic Design Models for Urban Water Distribution Network}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {48-56}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2020.203660.1170}, abstract = {Water distribution networks are amongst the most important infrastructures of water supply projects, which attracts notable financial credits from the governments. As optimal design can significantly reduce the costs of such large projects, designers always try to minimize the costs while applying all the constraints and technical specifications of the project. Genetic algorithm is one of the most popular approaches for optimizations in the design projects. This research aims at evaluating the meta-heuristic methods used in designing the urban water distribution networks and to assess the genetic algorithm as an optimization mean for such methods. Given the heavy costs associated with water distribution network projects, it is very important how a model perform the cost evaluation. For the current study, the modeling was first performed by WaterGEMS software and the total cost was calculated based on the price list. Then, according to the objective function and cost criterion and with respect to constraints of speed and pressure in the network, optimization was performed and the final cost was obtained. The results of the proposed method showed that by optimization, the investment cost would decrease by about 14% compared to the original plan. Comparison was also made to other meta-heuristic algorithms which confirmed better performance of the proposed algorithm with regards to costs.}, keywords = {Genetic Algorithm,optimization,Water Distribution Network,WaterGEMS}, title_fa = {ارزیابی هزینه‎ ای مدل‎ های فرا ابتکاری مورد استفاده در طراحی شبکه توزیع آب شهری}, abstract_fa = {شبکه‎های توزیع آب به‌عنوان یکی از مهم‎ترین زیرساخت‎های طرح‎های تأمین آب است که بخش مهمی از اعتبارات مالی کشور را به‎خود اختصاص داده است. از آن‎جا که طراحی بهینه دارای تأثیر به‎سزایی در کاهش هزینه چنین طرح‎های عظیمی است، طراحان همواره به‎دنبال یافتن روشی هستند که ضمن تأمین قیود و معیارهای فنی طرح، کمترین هزینه را داشته باشد. یکی از روش‎های بهینه‎سازی، روش الگوریتم‎ژنتیک است که از پرکاربردترین روش‌های بهینه‎سازی است. مسئله‎ای که مورد توجه این تحقیق است ارزیابی روش‎های فرا ابتکاری مورد استفاده در طراحی شبکه توزیع آب شهری است تا جایگاه الگوریتم ژنتیک به‎عنوان یک روش بهینه‎سازی در این خصوص مشخص شود. با توجه به هزینه‎های سنگین مترتب بر پروژه‎های شبکه توزیع آب، ارزیابی هزینه‎ای مدل‎ها مسئله‎ای مهم و مورد نیاز است. در این تحقیق بخشی از شبکه توزیع آب شهر مشهد با استفاده از روش الگوریتم‎ژنتیک، بهینه‎سازی شد. بدین منظور ابتدا مدل‎سازی توسط نرم افزار WaterGEMS انجام گرفت و هزینه کل براساس فهرست بها محاسبه شد، سپس با توجه به تابع هدف و معیار هزینه و با رعایت قیود سرعت و فشار مجاز شبکه، بهینه‎سازی انجام شد و هزینه نهایی به‎دست آمد. نتایج حاصل از روش ارائه شده نشان داد هزینه سرمایه‎گذاری پس از استفاده از رویکرد پیشنهادی بهینه‎سازی در حدود 14 درصد نسبت به طرح اولیه کاهش خواهد یافت. هم‎چنین مقایسه هزینه روش پیشنهادی در مقایسه با سایر الگوریتم های فرا ابتکاری وضعیت مطلوب تری را ارائه کرد.}, keywords_fa = {Genetic Algorithm,optimization,Water Distribution Network,WaterGEMS}, url = {https://www.jwwse.ir/article_118432.html}, eprint = {https://www.jwwse.ir/article_118432_b48abf3a8a18f0e1014ea00da99a6750.pdf} } @article { author = {Farhadian, Mehrdad and Soltani, Samira and Davari, Nila}, title = {Using Rice Bran Adsorbent for Furfural Removal from Contaminated Water Compared with Activated Carbon}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {57-63}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {10.22112/jwwse.2020.207564.1173}, abstract = {Furfural is a toxic and non-biodegradable substance that is found in wastewater of oil and petroleum refining and petrochemical industries. In this study, the function of rice bran adsorbent was evaluated for the removal of furfural from contaminated water. The effects of operational factors, including furfural concentration (100-900 mg/L), retention time (30-150 min), adsorbent concentration (5-30 g/L), and pH (2-10) were investigated via one-factor-at-a-time method. According to the results, pH had a significant effect on furfural adsorption while using rice bran adsorbent. The maximum adsorption capacity of furfural was obtained as about 10 mg/g at pH=8, while the furfural adsorption capacity dropped to 4.5 mg/g at pH=6. With an increase in retention time up to 80 min at pH=7, the adsorption equilibrium capacity of furfural was achieved at 7.5 mg/g, and this trend remained constant up to and after 24 hours. Furfural adsorption was 50% with rice bran adsorbent under optimal conditions as follows: adsorbent concentration=25 g/L, retention time=120 min, and pH=8. Langmuir isotherm model was obtained for the furfural removal using rice bran adsorbent.}, keywords = {Adsorption,Furfural,Natural Adsorbent,Oil refinery wastewater treatment,rice bran}, title_fa = {به‎ کارگیری جاذب سبوس برنج در حذف فورفورال از آب‏ های آلوده در مقایسه با کربن فعال}, abstract_fa = {فورفورال ماده‌ای سمی و زیست تخریب ناپذیر است که در فاضلاب صنایع پالایشگاهی، روغن‎سازی و پتروشیمی یافت می‌شود. در این پژوهش، عملکرد جاذب‌ سبوس برنج برای حذف فورفورال از آب‌های آلوده ارزیابی شد. اثر عوامل عملیاتی شامل غلظت فورفورال (mg/L 100-900)، زمان ماند (min 30-150)، غلظت جاذب (g/L 5-30) و pH محلول (10-2) با استفاده از طراحی آزمایش‌ها به‎روش یک عامل در یک زمان بررسی شد. مطابق با نتایج، pH عامل مهم و موثری در جذب فورفورال است. حداکثر ظرفیت جذب فورفورال بر سبوس برنج در 8=pH در حدود mg/g 10 به‎دست آمد. این درحالی است ‌که در 6=pH ظرفیت جذب فورفورال بر سبوس برنج برابر با mg/g 5/4 حاصل شد. با افزایش زمان ماند تا حدود min 80 در 7=pH، ظرفیت جذب تعادلی فورفورال بر سبوس برنج به حدود mg/g 5/7 رسید و این روند تا بعد از زمان ماند 24 ساعت نیز ثابت بود. مقادیر بهینه‌ عوامل در جذب 50 درصدی فورفورال با جاذب‏ سبوس برنج در غلظت جاذب g/L 25، زمان ماند min 120و 8=pH به‎دست آمد. مدل هم‏دمای لانگمیر برای حذف فورفورال با جاذب‌ سبوس برنج نتیجه شد.}, keywords_fa = {Adsorption,Furfural,Natural Adsorbent,Oil refinery wastewater treatment,rice bran}, url = {https://www.jwwse.ir/article_118433.html}, eprint = {https://www.jwwse.ir/article_118433_9f5ed30e582d9df843f19a9f18786f3f.pdf} } @article { author = {}, title = {Interview}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {64-67}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Interview}, keywords = {Interview}, title_fa = {مصاحبه}, abstract_fa = {مصاحبه}, keywords_fa = {Interview}, url = {https://www.jwwse.ir/article_118434.html}, eprint = {https://www.jwwse.ir/article_118434_6b77f1dd70e3fd928157a79906fd52fd.pdf} } @article { author = {}, title = {Round-Table}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {68-80}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Round-Table}, keywords = {Round,Table}, title_fa = {میزگرد}, abstract_fa = {میزگرد}, keywords_fa = {Round,Table}, url = {https://www.jwwse.ir/article_118435.html}, eprint = {https://www.jwwse.ir/article_118435_e69fb1762e36df3df5762af63e118d41.pdf} } @article { author = {}, title = {Best Thesis}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {81-83}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Best Thesis}, keywords = {Best Thesis}, title_fa = {پایان‌نامه برتر}, abstract_fa = {پایان‌نامه برتر}, keywords_fa = {Best Thesis}, url = {https://www.jwwse.ir/article_118437.html}, eprint = {https://www.jwwse.ir/article_118437_316289884a99376216de5888d33746bb.pdf} } @article { author = {}, title = {Best Idea}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {84-84}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Best Idea}, keywords = {Best Idea}, title_fa = {ایده برتر}, abstract_fa = {ایده برتر}, keywords_fa = {Best Idea}, url = {https://www.jwwse.ir/article_118439.html}, eprint = {https://www.jwwse.ir/article_118439_ba803705361c92924f2f46a967f23d77.pdf} } @article { author = {}, title = {Book Presentation}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {85-86}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {Book Presentation}, keywords = {Book Presentation}, title_fa = {معرفی کتاب}, abstract_fa = {معرفی کتاب}, keywords_fa = {Book Presentation}, url = {https://www.jwwse.ir/article_118440.html}, eprint = {https://www.jwwse.ir/article_118440_f76d3f98c34485ae5cb9f97a203f8d4b.pdf} } @article { author = {}, title = {IWWA News}, journal = {Journal of Water and Wastewater Science and Engineering}, volume = {5}, number = {2}, pages = {87-100}, year = {2020}, publisher = {}, issn = {2588-3941}, eissn = {2588-395X}, doi = {}, abstract = {IWWA News}, keywords = {IWWA News}, title_fa = {اخبار انجمن}, abstract_fa = {اخبار انجمن}, keywords_fa = {IWWA News}, url = {https://www.jwwse.ir/article_118441.html}, eprint = {https://www.jwwse.ir/article_118441_b2ce991ad25cf5f52ada993350fc53a0.pdf} }